Scenic Mirror Acrylic Logo — Toronto Condo Sales Office
ArtSigns, a custom sign manufacturer in Hamilton, Ontario, fabricated the eight-foot SCENIC dimensional logo for a condominium sales office on Eglinton in Toronto. Each letter is a two-layer laminate: a ¾-inch clear acrylic body with ¼-inch second-surface mirror acrylic bonded to the face. You look through the acrylic at a metal coating on the back of the mirror sheet — the same optical layout as a glass mirror, with acrylic in place of glass. Commercial acrylic mirror is typically vacuum-metallized aluminum rather than wet-process silver. Polished clear edges stay visible. The letters sit on threaded-rod standoffs on horizontal wood cladding. This laminate-and-raised-mount construction is still specified for GTA presentation centres in 2026.
Project specifications
- Project: SCENIC condominium sales / presentation centre
- Location: Eglinton, Toronto, Ontario
- Fabricator: ArtSigns, Hamilton, Ontario
- Overall size: 24 × 96 in (8 ft wide)
- Construction: Two-layer laminate
- Letter body: ¾ in clear acrylic
- Face: ¼ in second-surface mirror acrylic, laminated to the body
- Mirror type: Second-surface (reflective coating behind the sheet; typically vacuum-deposited aluminum on acrylic)
- Edges: Polished, water-clear, left exposed
- Mounting: Threaded rods, raised off horizontal wood cladding
- Lighting: Natural / ambient (no internal LED)
- Application: Exterior sales-office façade
- Construction status: Method current as of 2026
- Budget note: Historical listed range $3,000–$5,000; request a current quote for new work
A glass mirror is usually wet-silvered: silver is chemically deposited on the back of the glass. An acrylic mirror sheet is a different process and a different metal. The ¼-inch face on SCENIC is commercial second-surface acrylic mirror — typically aluminum applied under vacuum — then laminated to the ¾-inch clear body. The reflection is protected behind the sheet. Mirror film stuck on thin plexi is not this build. Film milks at an angle and has no glass-like rim.
The ¾-inch clear body is structural. An eight-foot wordmark cut from ¼-inch mirror sheet alone would flex and read as a sticker on a wood bay. The thick clear layer carries the hardware, keeps the laminate flat, and is what you see as the polished rim around each letter.
Threaded rods on horizontal wood cladding create a designed gap and a cast shadow. Adhesive-only mounts fail on an exterior sales-office façade and photograph as flat graphics. The shadow is part of the listing photo, not decoration.
A presentation centre has to create confidence before anyone meets the sales team. Dimensional second-surface mirror letters turn the façade into architecture and into a backdrop for marketing photography. That is the job of this sign.
Related ArtSigns work: Toronto office signs, FLY Condos mirror acrylic, ICE Condos internally lit logo, Bisha Hotel gold mirror sign, dimensional letters, office lobby signs.
Written by the ArtSigns fabrication team, Hamilton, Ontario. Page updated September 2026. Method still in production.
Raised SCENIC letters: second-surface mirror laminate, clear polished edges, threaded-rod mount.
Description:
Eight-foot SCENIC logo on the wood-clad Toronto sales office façade.
Stack: 3/4‑inch clear acrylic body and 1/4‑inch second-surface mirror face.
Mirror faces reflect the site; the clear laminate rim stays visible.
Edge detail: laminated mirror acrylic on clear acrylic against warm wood.
SCENIC Sign Questions
What is a second-surface mirror acrylic logo sign?
A second-surface mirror acrylic logo uses a mirror sheet whose reflective coating sits behind the acrylic, viewed through the sheet, the same way a glass mirror works. On SCENIC, ArtSigns laminated ¼‑inch second-surface mirror acrylic to a ¾‑inch clear acrylic body so each letter is a protected two-layer stack with a polished clear edge. Commercial acrylic mirror is typically vacuum-metallized aluminum, not wet-process silver on glass.
Are mirror acrylic letters suitable for a Toronto exterior sales office?
They can be when the face is a laminated second-surface mirror plate on a thick clear body (here ¼ inch on ¾ inch), edges are polished, and the letters are raised on hardware rather than taped. The coating sits behind the acrylic. Sun, weather and cleaning still matter; this is not a vinyl wrap.
How do you mount dimensional letters on horizontal wood cladding?
Use threaded rods or equivalent standoffs with a designed gap so the letter casts a shadow and does not trap water against the wood. That is the mount used on the SCENIC façade.
Mirror acrylic vs gold chrome vs brushed metal for a sales centre?
Second-surface mirror reflects the site and reads as architecture in photographs. Gold chrome or a brushed-metal substitute reads as jewellery. Painted acrylic reads as graphics. Choose by what the gallery needs the camera to see.
How large should a presentation-centre logo be?
SCENIC is 24 × 96 inches so it can anchor an eight-foot wood bay and stay readable on approach. Size follows viewing distance and the façade module, not a catalogue default.
Who fabricates custom 3D sales-centre signs in the GTA?
ArtSigns designs and builds dimensional sales-centre signs in Hamilton and installs across Toronto and the GTA. Related projects include FLY Condos (mirror acrylic on spacers), ICE Condos (2‑inch internally lit acrylic), and Bisha Hotel & Residences (gold mirror aluminum faces).
How long does this construction last?
The method is still specified in 2026. Service life of one façade depends on exposure, hardware and maintenance. Sales centres often rebrand; the value is the opening period and the photo library.
What does an 8‑foot dimensional logo cost?
Comparable ArtSigns projects have been listed in the $3,000 – $5,000 range depending on letter count, thickness, finish and installation. Treat that figure as historical and request a current quote.